EN Sinusbot Installer Script 1.5

[Qhiliqq]

I'm getting an error on line 1035

this is the log

root@ns508009:~# bash <(wget --no-check-certificate -O - 'https://sinusbot-installer.de/download.php?s=5829b25b7d817ad6e9b42d8dd0f6aa4b&t=1500462482')
--2017-07-19 00:12:06--  https://sinusbot-installer.de/download.php?s=5829b25b7d817ad6e9b42d8dd0f6aa4b&t=1500462482
Resolving sinusbot-installer.de (sinusbot-installer.de)... 31.172.90.14
Connecting to sinusbot-installer.de (sinusbot-installer.de)|31.172.90.14|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 31717 (31K) [application/octet-stream]
Saving to: ‘STDOUT’

-                                         100%[=====================================================================================>]  30.97K  --.-KB/s    in 0.001s

2017-07-19 00:12:06 (30.7 MB/s) - written to stdout [31717/31717]

Checking for the latest latest installer version
Your installer is up-to-date.
This is the automatic installer for latest SinusBot. USE AT YOUR OWN RISK!
You can choose between installing, upgrading and removing the SinusBot.
Installer by Philipp Esswein | DAThosting.eu - Your game-/voiceserver hoster (only german).
Please rate this script at: https://forum.sinusbot.com/resources/sinusbot-installer-script.58/
You're using Installer 1.3.10
What should the Installer do?
1) Install
2) Update
3) Remove
4) PW Reset
5) Quit
#? 1
Check if lsb-release and debconf-utils is installed...
Done!
Automatic usage or own directories?
1) Automatic
2) Own path
3) Quit
#?
1) Automatic
2) Own path
3) Quit
#? 2
Enter location where the bot should be installed/updated/removed. Like /opt/sinusbot. Include the / at first position and none at the end!
Location [/opt/sinusbot]: /home/sinusbot2
Your directory is /home/sinusbot2.
1) Yes
2) No, change it
3) Quit
#? 1
SinusBot isn't installed yet. Installer goes on.
This SinusBot version is only for private use! Accept?
1) No
2) Yes
#? 2
Should YT-DL be installed/updated?
1) Yes
2) No
#? 1
Update the system packages to the latest version? Recommended, as otherwise dependencies might break! Option "No" will exit the installer
1) Yes
2) Try without
3) No
#? 1
Start installer now!
Updating the system in a few seconds silently (no optical output)!
This could take a while. Please wait up to 10 minutes!
Installing necessary packages. Please wait...
Packages installed!
Please enter the name of the sinusbot user. Typically "sinusbot". If it does not exists, the installer will create it.
Username [sinusbot]:
Your sinusbot user is: sinusbot
Downloading TS3 client files.
Installing the TS3 client.
Read the eula!
Do the following: Press "ENTER" then press "q" after that press "y" and accept it with another "ENTER".
Welcome to the TeamSpeak 3 Client for Linux on amd64 installer

In order to install this software you are required to accept the license
agreement, please press return to view the license.

You can scroll with the arrow keys and quit the viewer by pressing 'q'.
[RETURN]

Please type y to accept, n otherwise:
Please type y to accept, n otherwise: y
Creating directory TeamSpeak3-Client-linux_amd64
Verifying archive integrity... All good.
Uncompressing TeamSpeak 3 Client for Linux on amd64  100%
TS3 client install done.
Downloading latest SinusBot.
Extracting SinusBot files.
SinusBot installation done.
Starting init.d installation
Installed init.d file to start the SinusBot with "/etc/init.d/sinusbot {start|stop|status|restart|console|update|backup}"
config.ini created successfully.
Installing Cronjob for automatic SinusBot update...
Installing SinusBot update cronjob successful.
Installing YT-Downloader now!
Cronjob already set for YT-DL updater!
Downloading YT-DL now...
Download successful!
youtube-dl is up-to-date (2017.07.15)
Generated README_installer.txt!
Can't set your date automatically. Please follow the following steps:
Day    (01-32): 19
Month  (01-12): 07
Year   (2017):  2017
Choose your time format:
1) 12 hour
2) 24 hour
#? 2
Hour   (1-24):  13
Minute (0-59):  1
Second (0-59):  0
13:01:00
20170719
Deleted /tmp/.sinusbot.lock
Starting the SinusBot. For first time.
2017/07/19 00:00:00 X [MAIN] Starting up fake x-server...
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin advertising.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin aloneMode.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin badchan.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin bookmark.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin covatar.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin dev.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin followme.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin idle.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin metadata.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin norecording.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin rememberChannel.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin showcase.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin sound.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin welcometext.js
2017/07/19 00:00:03 Updating database to v1... 0
2017/07/19 00:00:03 Updating database to v2... 1
2017/07/19 00:00:03 Updating database to v3... 2
2017/07/19 00:00:03 Updating database to v4... 3
2017/07/19 00:00:03 Updating database to v5... 4
2017/07/19 00:00:04 Updating database to v6... 5
2017/07/19 00:00:04 Updating database to v7... 6
2017/07/19 00:00:04 780acada          INFO   Loading instances
2017/07/19 00:00:04 780acada          INFO   Creating default instance
2017/07/19 00:00:04 780acada 91286fcd INFO   Starting instance ts3server://127.0.0.1?port=9987&nickname=SinusBot&password=&channel=&channelpassword=
2017/07/19 00:00:04 X [MAIN] New connection
2017/07/19 00:00:04 780acada          INFO   Promoting instance to main instance
2017/07/19 00:00:04 780acada          INFO   Adding new user admin
Starting SinusBot again. Your admin password = 'PMK0ipvw'
Using following data:
USER: sinusbot
DIR ROOT: /home/sinusbot2/
BOT RUN CMD: ./sinusbot

Starting sinusbot...
No directory, logging in with HOME=/
You are not the owner of /var/run/screen/S-sinusbot.
sinusbot started successfully
Please wait... This will take some seconds!
SinusBot could not start! Starting it directly. Look for errors!
___ ___ _  _ _   _ ___ ___  ___ _____  BETA
/ __|_ _| \| | | | / __| _ )/ _ \_   _|
\__ \| || .` | |_| \__ \ _ \ (_) || |
|___/___|_|\_|\___/|___/___/\___/ |_|

Version: 0.9.21-87a90ce
(C) 2013-2017 Michael Friese. All rights reserved.

2017/07/19 00:00:18 X [MAIN] Starting up fake x-server...
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin advertising.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin aloneMode.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin badchan.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin bookmark.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin covatar.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin dev.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin followme.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin idle.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin metadata.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin norecording.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin rememberChannel.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin showcase.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin sound.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin welcometext.js
a manual update is required
Error on line 1035. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L1035
root@ns508009:~#

I cant start the bot and I tried reinstalling too so yeah.. any idea how to fix this?

@maxibanki Kann mir das nicht erklären, der Installer kopiert auch das Plugin richtig...

Hi,

I am trying to install Sinusbot, but I'm having the following problem. Can you please help?

Note: I am using version 17.04 x64 of Ubuntu.

I can't see any problem... Whats the matter?

i think the problem is not fixed :b

Can't set your date automatically. Please follow the following steps:
Day (01-32): 17
Month (01-12): 07
Year (2017): 2017
Choose your time format:
1) 12 hour
2) 24 hour
#? 2
Hour (1-24): 20
Minute (0-59): 20
Second (0-59): 10
date: cannot set date: Operation not permitted
20:20:10
Error on line 935. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L935

Change your hoster... You're using OpenVZ virtualization there you can't change the time yourself. I'll try to include a command to set this but can't say a eta.

Where is this sinusbot installed? I dont see it in a folder at /home/sinusbot.

Is on /opt/sinusbot

 

[DonGalaxy]

Ich bekomme diese Fehlermeldung

--2017-07-19 14:47:53-- https://sinusbot-installer.de/download.php?s=c54615dc23 9b8ad1958b32ea9445a4ab&t=1500475889
Resolving sinusbot-installer.de (sinusbot-installer.de)... 31.172.90.14
Connecting to sinusbot-installer.de (sinusbot-installer.de)|31.172.90.14|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 32298 (32K) [application/octet-stream]
Saving to: ‘STDOUT’

- 100%[===================>] 31.54K --.-KB/s in 0.001s

2017-07-19 14:47:53 (57.7 MB/s) - written to stdout [32298/32298]

Checking for the latest latest installer version
Selecting previously unselected package dmidecode.
(Reading database ... 74725 files and directories currently installed.)
Preparing to unpack .../dmidecode_3.0-3_amd64.deb ...
Unpacking dmidecode (3.0-3) ...
Selecting previously unselected package virt-what.
Preparing to unpack .../virt-what_1.14-1_amd64.deb ...
Unpacking virt-what (1.14-1) ...
Setting up dmidecode (3.0-3) ...
Setting up virt-what (1.14-1) ...
Processing triggers for man-db (2.7.5-1) ...
Your installer is up-to-date.
This is the automatic installer for latest SinusBot. USE AT YOUR OWN RISK!
You can choose between installing, upgrading and removing the SinusBot.
Installer by Philipp Esswein | DAThosting.eu - Your game-/voiceserver hoster (on ly german).
Please rate this script at: https://forum.sinusbot.com/resources/sinusbot-instal ler-script.58/
You're using Installer 1.3.10
What should the Installer do?
1) Install
2) Update
3) Remove
4) PW Reset
5) Quit
#? 1
Check if lsb-release and debconf-utils is installed...
Done!
Automatic usage or own directories?
1) Automatic
2) Own path
3) Quit
#? 1
SinusBot already installed with automatic install option!
Would you like to update the bot instead? [Y / N]: Y
This SinusBot version is only for private use! Accept?
1) No
2) Yes
#? 2
Should YT-DL be installed/updated?
1) Yes
2) No
#? 1
Check your time below:
DATE: 07/19/17
TIME: 14:48:25
1) Correct
2) Incorrect
#? 2
Can't set your date automatically. Please follow the following steps:
Day (01-32): 19
Month (01-12): 07
Year (2017): 2017
Choose your time format:
1) 12 hour
2) 24 hour
#? 2
Hour (1-24): 16
Minute (0-59): 42
Second (0-59): 30
16:42:30
20170719
Update the system packages to the latest version? Recommended, as otherwise depe ndencies might break! Option "No" will exit the installer
1) Yes
2) Try without
3) No
#? 1
Start installer now!
Updating the system in a few seconds silently (no optical output)!
This could take a while. Please wait up to 10 minutes!
Installing necessary packages. Please wait...
Packages installed!
TS3 already latest version.
Downloading latest SinusBot.
Extracting SinusBot files.
SinusBot update done.
Starting init.d installation
Installed init.d file to start the SinusBot with "/etc/init.d/sinusbot {start|st op|status|restart|console|update|backup}"
Cronjob already set for SinusBot updater!
Installing YT-Downloader now!
Cronjob already set for YT-DL updater!
Downloading YT-DL now...
Download successful!
youtube-dl is up-to-date (2017.07.15)
Generated README_installer.txt!
Deleted /tmp/.sinusbot.lock
Using following data:
USER: sinusbot
DIR ROOT: /opt/sinusbot/
BOT RUN CMD: ./sinusbot

Starting sinusbot...
sinusbot started successfully
Please wait... This will take some seconds!
SinusBot could not start! Starting it directly. Look for errors!
___ ___ _ _ _ _ ___ ___ ___ _____ BETA
/ __|_ _| \| | | | / __| _ )/ _ \_ _|
\__ \| || .` | |_| \__ \ _ \ (_) || |
|___/___|_|\_|\___/|___/___/\___/ |_|

Version: 0.9.21-87a90ce
(C) 2013-2017 Michael Friese. All rights reserved.

2017/07/19 00:01:03 X [MAIN] Starting up fake x-server...
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin advertising.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin aloneMode.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin badchan.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin bookmark.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin covatar.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin dev.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin followme.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin idle.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin metadata.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin norecording.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin rememberChanne l.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin showcase.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin sound.js
2017/07/19 00:01:04 [GENERAL/SCRIPTS] INFO Loading ScriptPlugin welcometext.js
a manual update is required
Error on line 1055. Report this to the author at https://forum.sinusbot.com/thre ads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this i s an error of your system not of the installer script. Or have a look directly t o your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_i nstaller.sh#L1055

 

[H CODER]

Hi,

It says 100% but it does not go on. There is detail on the screeshot.

 

[Qhiliqq]

Hi,

It says 100% but it does not go on. There is detail on the screeshot.

How long did you wait?
If you got a slow system this coud take over 10 minutes or longer...

 

[Haz]

I'm getting an error on line 1035

this is the log

root@ns508009:~# bash <(wget --no-check-certificate -O - 'https://sinusbot-installer.de/download.php?s=5829b25b7d817ad6e9b42d8dd0f6aa4b&t=1500462482')
--2017-07-19 00:12:06--  https://sinusbot-installer.de/download.php?s=5829b25b7d817ad6e9b42d8dd0f6aa4b&t=1500462482
Resolving sinusbot-installer.de (sinusbot-installer.de)... 31.172.90.14
Connecting to sinusbot-installer.de (sinusbot-installer.de)|31.172.90.14|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 31717 (31K) [application/octet-stream]
Saving to: ‘STDOUT’

-                                         100%[=====================================================================================>]  30.97K  --.-KB/s    in 0.001s

2017-07-19 00:12:06 (30.7 MB/s) - written to stdout [31717/31717]

Checking for the latest latest installer version
Your installer is up-to-date.
This is the automatic installer for latest SinusBot. USE AT YOUR OWN RISK!
You can choose between installing, upgrading and removing the SinusBot.
Installer by Philipp Esswein | DAThosting.eu - Your game-/voiceserver hoster (only german).
Please rate this script at: https://forum.sinusbot.com/resources/sinusbot-installer-script.58/
You're using Installer 1.3.10
What should the Installer do?
1) Install
2) Update
3) Remove
4) PW Reset
5) Quit
#? 1
Check if lsb-release and debconf-utils is installed...
Done!
Automatic usage or own directories?
1) Automatic
2) Own path
3) Quit
#?
1) Automatic
2) Own path
3) Quit
#? 2
Enter location where the bot should be installed/updated/removed. Like /opt/sinusbot. Include the / at first position and none at the end!
Location [/opt/sinusbot]: /home/sinusbot2
Your directory is /home/sinusbot2.
1) Yes
2) No, change it
3) Quit
#? 1
SinusBot isn't installed yet. Installer goes on.
This SinusBot version is only for private use! Accept?
1) No
2) Yes
#? 2
Should YT-DL be installed/updated?
1) Yes
2) No
#? 1
Update the system packages to the latest version? Recommended, as otherwise dependencies might break! Option "No" will exit the installer
1) Yes
2) Try without
3) No
#? 1
Start installer now!
Updating the system in a few seconds silently (no optical output)!
This could take a while. Please wait up to 10 minutes!
Installing necessary packages. Please wait...
Packages installed!
Please enter the name of the sinusbot user. Typically "sinusbot". If it does not exists, the installer will create it.
Username [sinusbot]:
Your sinusbot user is: sinusbot
Downloading TS3 client files.
Installing the TS3 client.
Read the eula!
Do the following: Press "ENTER" then press "q" after that press "y" and accept it with another "ENTER".
Welcome to the TeamSpeak 3 Client for Linux on amd64 installer

In order to install this software you are required to accept the license
agreement, please press return to view the license.

You can scroll with the arrow keys and quit the viewer by pressing 'q'.
[RETURN]

Please type y to accept, n otherwise:
Please type y to accept, n otherwise: y
Creating directory TeamSpeak3-Client-linux_amd64
Verifying archive integrity... All good.
Uncompressing TeamSpeak 3 Client for Linux on amd64  100%
TS3 client install done.
Downloading latest SinusBot.
Extracting SinusBot files.
SinusBot installation done.
Starting init.d installation
Installed init.d file to start the SinusBot with "/etc/init.d/sinusbot {start|stop|status|restart|console|update|backup}"
config.ini created successfully.
Installing Cronjob for automatic SinusBot update...
Installing SinusBot update cronjob successful.
Installing YT-Downloader now!
Cronjob already set for YT-DL updater!
Downloading YT-DL now...
Download successful!
youtube-dl is up-to-date (2017.07.15)
Generated README_installer.txt!
Can't set your date automatically. Please follow the following steps:
Day    (01-32): 19
Month  (01-12): 07
Year   (2017):  2017
Choose your time format:
1) 12 hour
2) 24 hour
#? 2
Hour   (1-24):  13
Minute (0-59):  1
Second (0-59):  0
13:01:00
20170719
Deleted /tmp/.sinusbot.lock
Starting the SinusBot. For first time.
2017/07/19 00:00:00 X [MAIN] Starting up fake x-server...
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin advertising.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin aloneMode.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin badchan.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin bookmark.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin covatar.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin dev.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin followme.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin idle.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin metadata.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin norecording.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin rememberChannel.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin showcase.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin sound.js
2017/07/19 00:00:00 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin welcometext.js
2017/07/19 00:00:03 Updating database to v1... 0
2017/07/19 00:00:03 Updating database to v2... 1
2017/07/19 00:00:03 Updating database to v3... 2
2017/07/19 00:00:03 Updating database to v4... 3
2017/07/19 00:00:03 Updating database to v5... 4
2017/07/19 00:00:04 Updating database to v6... 5
2017/07/19 00:00:04 Updating database to v7... 6
2017/07/19 00:00:04 780acada          INFO   Loading instances
2017/07/19 00:00:04 780acada          INFO   Creating default instance
2017/07/19 00:00:04 780acada 91286fcd INFO   Starting instance ts3server://127.0.0.1?port=9987&nickname=SinusBot&password=&channel=&channelpassword=
2017/07/19 00:00:04 X [MAIN] New connection
2017/07/19 00:00:04 780acada          INFO   Promoting instance to main instance
2017/07/19 00:00:04 780acada          INFO   Adding new user admin
Starting SinusBot again. Your admin password = 'PMK0ipvw'
Using following data:
USER: sinusbot
DIR ROOT: /home/sinusbot2/
BOT RUN CMD: ./sinusbot

Starting sinusbot...
No directory, logging in with HOME=/
You are not the owner of /var/run/screen/S-sinusbot.
sinusbot started successfully
Please wait... This will take some seconds!
SinusBot could not start! Starting it directly. Look for errors!
___ ___ _  _ _   _ ___ ___  ___ _____  BETA
/ __|_ _| \| | | | / __| _ )/ _ \_   _|
\__ \| || .` | |_| \__ \ _ \ (_) || |
|___/___|_|\_|\___/|___/___/\___/ |_|

Version: 0.9.21-87a90ce
(C) 2013-2017 Michael Friese. All rights reserved.

2017/07/19 00:00:18 X [MAIN] Starting up fake x-server...
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin advertising.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin aloneMode.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin badchan.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin bookmark.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin covatar.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin dev.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin followme.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin idle.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin metadata.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin norecording.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin rememberChannel.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin showcase.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin sound.js
2017/07/19 00:00:19 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin welcometext.js
a manual update is required
Error on line 1035. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L1035
root@ns508009:~#

I cant start the bot and I tried reinstalling too so yeah.. any idea how to fix this?

nvm just had to restart the dedi and now it works fine.

 

[daroonline]

Guten Tag Qhiliqq und Community,

ich war dabei den Script zu installieren, doch in der Installation ist mein Internet weggebrochen... Nun lässt er sich nicht mehr neu installieren, da ja wahrscheinlich ein Teil schon aufm Server ist... Nur wo? Ich kann es nicht finden...


Ich wäre euch sehr dankbar, wenn ihr mir helfen könntet

Mit freundlichem Gruß
Daroonline

Fehlercode :
Error on line 64. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L64

Serversystem : debian-8.0

 

[Qhiliqq]

Guten Tag Qhiliqq und Community,

ich war dabei den Script zu installieren, doch in der Installation ist mein Internet weggebrochen... Nun lässt er sich nicht mehr neu installieren, da ja wahrscheinlich ein Teil schon aufm Server ist... Nur wo? Ich kann es nicht finden...


Ich wäre euch sehr dankbar, wenn ihr mir helfen könntet

Mit freundlichem Gruß
Daroonline

Fehlercode :
Error on line 64. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L64

Serversystem : debian-8.0

Hey
Gib mal

apt-get install wget && apt-get install virt-what

ein und schau mal was da kommt... Kommt ein Error? Wenn nein, einfach nochmal den Installer anschmeißen, dann 3. wählen zum löschen und danach erneut installieren

 

[daroonline]

Hey
Gib mal

apt-get install wget && apt-get install virt-what

ein und schau mal was da kommt... Kommt ein Error? Wenn nein, einfach nochmal den Installer anschmeißen, dann 3. wählen zum löschen und danach erneut installieren

Schon einmal vielen Dank für die Antwort, doch leider kam darauf hin ein Fehler.

E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.

Beim Eingeben von dpkg --configure -a kam dann diese Fehlermeldung...

Setting up ntp (1:4.2.6.p5+dfsg-7+deb8u2) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults

Dort weiß ich und meine Googleanfragen auch nicht mehr weiter Evtl. fällt dir ja was ein

 

[Xuxe]

update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults

Das ist nur ne Warnung. Verwundert mich aber in dem context das du Debian 8 angeblich hast. - Was sagt: cat /etc/debian_version ?
Aber das Script sollte nu wieder laufen.

 

[daroonline]

Das ist nur ne Warnung. Verwundert mich aber in dem context das du Debian 8 angeblich hast. - Was sagt: cat /etc/debian_version ?
Aber das Script sollte nu wieder laufen.

Das hier wird mir angezeigt :

8.8

Script läuft leider nicht, selber Fehler.

 

[RazorLP]

Hallo, ich bekomme den Fehler beim Updaten des Bottes...

Spoiler: Fehlercode

Your installer is up-to-date.
This is the automatic installer for latest SinusBot. USE AT YOUR OWN RISK!
You can choose between installing, upgrading and removing the SinusBot.
Installer by Philipp Esswein | DAThosting.eu - Your game-/voiceserver hoster (only german).
Please rate this script at: https://forum.sinusbot.com/resources/sinusbot-installer-script.58/
You're using Installer 1.3.10
What should the Installer do?
1) Install
2) Update
3) Remove
4) PW Reset
5) Quit
#? 2
Check if lsb-release and debconf-utils is installed...
Done!
Automatically chosen system.d for your startscript!
Automatic usage or own directories?
1) Automatic
2) Own path
3) Quit
#? 1
SinusBot is installed. Installer goes on.
This SinusBot version is only for private use! Accept?
1) No
2) Yes
#? 2
Should YT-DL be installed/updated?
1) Yes
2) No
#? 1
/dev/fd/63: line 510: [: too many arguments
Check your time below:
DATE: 07/22/17
TIME: 19:21:57
1) Correct
2) Incorrect
#? 2
Automatic time set!
Update the system packages to the latest version? Recommended, as otherwise dependencies might break! Option "No" will exit the installer
1) Yes
2) Try without
3) No
#? 1
Start installer now!
Updating the system in a few seconds silently (no optical output)!
This could take a while. Please wait up to 10 minutes!
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76, <> line 25.)
debconf: falling back to frontend: Readline
Preconfiguring packages ...
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../base-files_8+deb8u9_amd64.deb ...
Unpacking base-files (8+deb8u9) over (8+deb8u8) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up base-files (8+deb8u9) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../perl_5.20.2-3+deb8u8_amd64.deb ...
Unpacking perl (5.20.2-3+deb8u8) over (5.20.2-3+deb8u7) ...
Preparing to unpack .../perl-base_5.20.2-3+deb8u8_amd64.deb ...
Unpacking perl-base (5.20.2-3+deb8u8) over (5.20.2-3+deb8u7) ...
Setting up perl-base (5.20.2-3+deb8u8) ...
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../perl-modules_5.20.2-3+deb8u8_all.deb ...
Unpacking perl-modules (5.20.2-3+deb8u8) over (5.20.2-3+deb8u7) ...
Preparing to unpack .../debconf-utils_1.5.56+deb8u1_all.deb ...
Unpacking debconf-utils (1.5.56+deb8u1) over (1.5.56) ...
Preparing to unpack .../debconf-i18n_1.5.56+deb8u1_all.deb ...
Unpacking debconf-i18n (1.5.56+deb8u1) over (1.5.56) ...
Preparing to unpack .../debconf_1.5.56+deb8u1_all.deb ...
Unpacking debconf (1.5.56+deb8u1) over (1.5.56) ...
Setting up debconf (1.5.56+deb8u1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../libpam0g_1.1.8-3.1+deb8u2+b1_amd64.deb ...
Unpacking libpam0g:amd64 (1.1.8-3.1+deb8u2+b1) over (1.1.8-3.1+deb8u2) ...
Setting up libpam0g:amd64 (1.1.8-3.1+deb8u2+b1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Processing triggers for libc-bin (2.19-18+deb8u10) ...
(Reading database ... 25944 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.1.8-3.1+deb8u2+b1_amd64.deb ...
Unpacking libpam-modules-bin (1.1.8-3.1+deb8u2+b1) over (1.1.8-3.1+deb8u2) ...
Setting up libpam-modules-bin (1.1.8-3.1+deb8u2+b1) ...
(Reading database ... 25945 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.1.8-3.1+deb8u2+b1_amd64.deb ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Unpacking libpam-modules:amd64 (1.1.8-3.1+deb8u2+b1) over (1.1.8-3.1+deb8u2) ...
Setting up libpam-modules:amd64 (1.1.8-3.1+deb8u2+b1) ...
(Reading database ... 25946 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.6.3-2+deb8u4_amd64.deb ...
Unpacking libgcrypt20:amd64 (1.6.3-2+deb8u4) over (1.6.3-2+deb8u3) ...
Setting up libgcrypt20:amd64 (1.6.3-2+deb8u4) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
(Reading database ... 25946 files and directories currently installed.)
Preparing to unpack .../libgnutls-openssl27_3.3.8-6+deb8u7_amd64.deb ...
Unpacking libgnutls-openssl27:amd64 (3.3.8-6+deb8u7) over (3.3.8-6+deb8u6) ...
Preparing to unpack .../libgnutls-deb0-28_3.3.8-6+deb8u7_amd64.deb ...
Unpacking libgnutls-deb0-28:amd64 (3.3.8-6+deb8u7) over (3.3.8-6+deb8u6) ...
Preparing to unpack .../apache2_2.4.10-10+deb8u10_amd64.deb ...
Unpacking apache2 (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../apache2-bin_2.4.10-10+deb8u10_amd64.deb ...
Unpacking apache2-bin (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../apache2-utils_2.4.10-10+deb8u10_amd64.deb ...
Unpacking apache2-utils (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../apache2-data_2.4.10-10+deb8u10_all.deb ...
Unpacking apache2-data (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../libgtk2.0-common_2.24.25-3+deb8u2_all.deb ...
Unpacking libgtk2.0-common (2.24.25-3+deb8u2) over (2.24.25-3+deb8u1) ...
Preparing to unpack .../libgtk2.0-bin_2.24.25-3+deb8u2_amd64.deb ...
Unpacking libgtk2.0-bin (2.24.25-3+deb8u2) over (2.24.25-3+deb8u1) ...
Preparing to unpack .../libgtk2.0-0_2.24.25-3+deb8u2_amd64.deb ...
Unpacking libgtk2.0-0:amd64 (2.24.25-3+deb8u2) over (2.24.25-3+deb8u1) ...
Preparing to unpack .../libonig2_5.9.5-3.2+deb8u1_amd64.deb ...
Unpacking libonig2:amd64 (5.9.5-3.2+deb8u1) over (5.9.5-3.2) ...
Preparing to unpack .../libtiff5_4.0.3-12.3+deb8u4_amd64.deb ...
Unpacking libtiff5:amd64 (4.0.3-12.3+deb8u4) over (4.0.3-12.3+deb8u3) ...
Preparing to unpack .../php-tcpdf_6.0.093+dfsg-1+deb8u1_all.deb ...
Unpacking php-tcpdf (6.0.093+dfsg-1+deb8u1) over (6.0.093+dfsg-1) ...
Preparing to unpack .../xserver-common_2%3a1.16.4-1+deb8u1_all.deb ...
Unpacking xserver-common (2:1.16.4-1+deb8u1) over (2:1.16.4-1) ...
Preparing to unpack .../xvfb_2%3a1.16.4-1+deb8u1+b1_amd64.deb ...
Unpacking xvfb (2:1.16.4-1+deb8u1+b1) over (2:1.16.4-1) ...
Processing triggers for systemd (215-17+deb8u7) ...
Setting up perl-modules (5.20.2-3+deb8u8) ...
Setting up perl (5.20.2-3+deb8u8) ...
Setting up debconf-utils (1.5.56+deb8u1) ...
Setting up debconf-i18n (1.5.56+deb8u1) ...
Setting up libgnutls-deb0-28:amd64 (3.3.8-6+deb8u7) ...
Setting up libgnutls-openssl27:amd64 (3.3.8-6+deb8u7) ...
Setting up apache2-bin (2.4.10-10+deb8u10) ...
Setting up apache2-utils (2.4.10-10+deb8u10) ...
Setting up apache2-data (2.4.10-10+deb8u10) ...
Setting up apache2 (2.4.10-10+deb8u10) ...
Setting up libgtk2.0-common (2.24.25-3+deb8u2) ...
Setting up libgtk2.0-0:amd64 (2.24.25-3+deb8u2) ...
Setting up libgtk2.0-bin (2.24.25-3+deb8u2) ...
Setting up libonig2:amd64 (5.9.5-3.2+deb8u1) ...
Setting up libtiff5:amd64 (4.0.3-12.3+deb8u4) ...
Setting up php-tcpdf (6.0.093+dfsg-1+deb8u1) ...
Setting up xserver-common (2:1.16.4-1+deb8u1) ...
Setting up xvfb (2:1.16.4-1+deb8u1+b1) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Installing necessary packages. Please wait...
Packages installed!
TS3 already latest version.
Downloading latest SinusBot.
Extracting SinusBot files.
SinusBot update done.
Starting systemd installation
Installed systemd file to start the SinusBot with "service sinusbot {start|stop|status|restart}"
Cronjob already set for SinusBot updater!
Installing YT-Downloader now!
Cronjob already set for YT-DL updater!
Downloading YT-DL now...
Download successful!
youtube-dl is up-to-date (2017.07.23)
Generated README_installer.txt!
Deleted /tmp/.sinusbot.lock
Please wait... This will take some seconds!
/dev/fd/63: line 1020: /etc/init.d/sinusbot: No such file or directory
SinusBot could not start! Starting it directly. Look for errors!
2017/07/22 19:23:30 X [MAIN] Starting up fake x-server...
___ ___ _  _ _   _ ___ ___  ___ _____  BETA
/ __|_ _| \| | | | / __| _ )/ _ \_   _|
\__ \| || .` | |_| \__ \ _ \ (_) || |
|___/___|_|\_|\___/|___/___/\___/ |_|

Version: 0.9.21-87a90ce
(C) 2013-2017 Michael Friese. All rights reserved.

2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin ZTSupport - SupportChannel With ServerGroup Support.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin advertising.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin aloneMode.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin badchan.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin bookmark.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin covatar.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin dev.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin followme.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin idle.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin metadata.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin norecording.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin rememberChannel.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin showcase.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin sound.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin stickyChannel.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin tunakills_ranking (1).js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin welcometext.js
a manual update is required
Error on line 1055. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L1055

Wäre sehr dankbar wenn mir der Author oder jemand anderes helfen könnte..desweiteren wieso sagt der bot immer nach jedem neustart a manuel update is required aber der Beta Beitrag bekommt kein Update angezeigt?

 

[H CODER]

How long did you wait?
If you got a slow system this coud take over 10 minutes or longer...

Hi,

Thanks for your reply. I waited around half an hour. But there is no progress.

 

[Qhiliqq]

Das hier wird mir angezeigt :

8.8

Script läuft leider nicht, selber Fehler.

Kann an einer Virtualisierung, oder einem defekten Debian liegen.
Genau kann ich das allerdings nicht festmachen...

Hallo, ich bekomme den Fehler beim Updaten des Bottes...

Spoiler: Fehlercode

Your installer is up-to-date.
This is the automatic installer for latest SinusBot. USE AT YOUR OWN RISK!
You can choose between installing, upgrading and removing the SinusBot.
Installer by Philipp Esswein | DAThosting.eu - Your game-/voiceserver hoster (only german).
Please rate this script at: https://forum.sinusbot.com/resources/sinusbot-installer-script.58/
You're using Installer 1.3.10
What should the Installer do?
1) Install
2) Update
3) Remove
4) PW Reset
5) Quit
#? 2
Check if lsb-release and debconf-utils is installed...
Done!
Automatically chosen system.d for your startscript!
Automatic usage or own directories?
1) Automatic
2) Own path
3) Quit
#? 1
SinusBot is installed. Installer goes on.
This SinusBot version is only for private use! Accept?
1) No
2) Yes
#? 2
Should YT-DL be installed/updated?
1) Yes
2) No
#? 1
/dev/fd/63: line 510: [: too many arguments
Check your time below:
DATE: 07/22/17
TIME: 19:21:57
1) Correct
2) Incorrect
#? 2
Automatic time set!
Update the system packages to the latest version? Recommended, as otherwise dependencies might break! Option "No" will exit the installer
1) Yes
2) Try without
3) No
#? 1
Start installer now!
Updating the system in a few seconds silently (no optical output)!
This could take a while. Please wait up to 10 minutes!
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76, <> line 25.)
debconf: falling back to frontend: Readline
Preconfiguring packages ...
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../base-files_8+deb8u9_amd64.deb ...
Unpacking base-files (8+deb8u9) over (8+deb8u8) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up base-files (8+deb8u9) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../perl_5.20.2-3+deb8u8_amd64.deb ...
Unpacking perl (5.20.2-3+deb8u8) over (5.20.2-3+deb8u7) ...
Preparing to unpack .../perl-base_5.20.2-3+deb8u8_amd64.deb ...
Unpacking perl-base (5.20.2-3+deb8u8) over (5.20.2-3+deb8u7) ...
Setting up perl-base (5.20.2-3+deb8u8) ...
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../perl-modules_5.20.2-3+deb8u8_all.deb ...
Unpacking perl-modules (5.20.2-3+deb8u8) over (5.20.2-3+deb8u7) ...
Preparing to unpack .../debconf-utils_1.5.56+deb8u1_all.deb ...
Unpacking debconf-utils (1.5.56+deb8u1) over (1.5.56) ...
Preparing to unpack .../debconf-i18n_1.5.56+deb8u1_all.deb ...
Unpacking debconf-i18n (1.5.56+deb8u1) over (1.5.56) ...
Preparing to unpack .../debconf_1.5.56+deb8u1_all.deb ...
Unpacking debconf (1.5.56+deb8u1) over (1.5.56) ...
Setting up debconf (1.5.56+deb8u1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
(Reading database ... 25943 files and directories currently installed.)
Preparing to unpack .../libpam0g_1.1.8-3.1+deb8u2+b1_amd64.deb ...
Unpacking libpam0g:amd64 (1.1.8-3.1+deb8u2+b1) over (1.1.8-3.1+deb8u2) ...
Setting up libpam0g:amd64 (1.1.8-3.1+deb8u2+b1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Processing triggers for libc-bin (2.19-18+deb8u10) ...
(Reading database ... 25944 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.1.8-3.1+deb8u2+b1_amd64.deb ...
Unpacking libpam-modules-bin (1.1.8-3.1+deb8u2+b1) over (1.1.8-3.1+deb8u2) ...
Setting up libpam-modules-bin (1.1.8-3.1+deb8u2+b1) ...
(Reading database ... 25945 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.1.8-3.1+deb8u2+b1_amd64.deb ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Unpacking libpam-modules:amd64 (1.1.8-3.1+deb8u2+b1) over (1.1.8-3.1+deb8u2) ...
Setting up libpam-modules:amd64 (1.1.8-3.1+deb8u2+b1) ...
(Reading database ... 25946 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.6.3-2+deb8u4_amd64.deb ...
Unpacking libgcrypt20:amd64 (1.6.3-2+deb8u4) over (1.6.3-2+deb8u3) ...
Setting up libgcrypt20:amd64 (1.6.3-2+deb8u4) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
(Reading database ... 25946 files and directories currently installed.)
Preparing to unpack .../libgnutls-openssl27_3.3.8-6+deb8u7_amd64.deb ...
Unpacking libgnutls-openssl27:amd64 (3.3.8-6+deb8u7) over (3.3.8-6+deb8u6) ...
Preparing to unpack .../libgnutls-deb0-28_3.3.8-6+deb8u7_amd64.deb ...
Unpacking libgnutls-deb0-28:amd64 (3.3.8-6+deb8u7) over (3.3.8-6+deb8u6) ...
Preparing to unpack .../apache2_2.4.10-10+deb8u10_amd64.deb ...
Unpacking apache2 (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../apache2-bin_2.4.10-10+deb8u10_amd64.deb ...
Unpacking apache2-bin (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../apache2-utils_2.4.10-10+deb8u10_amd64.deb ...
Unpacking apache2-utils (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../apache2-data_2.4.10-10+deb8u10_all.deb ...
Unpacking apache2-data (2.4.10-10+deb8u10) over (2.4.10-10+deb8u9) ...
Preparing to unpack .../libgtk2.0-common_2.24.25-3+deb8u2_all.deb ...
Unpacking libgtk2.0-common (2.24.25-3+deb8u2) over (2.24.25-3+deb8u1) ...
Preparing to unpack .../libgtk2.0-bin_2.24.25-3+deb8u2_amd64.deb ...
Unpacking libgtk2.0-bin (2.24.25-3+deb8u2) over (2.24.25-3+deb8u1) ...
Preparing to unpack .../libgtk2.0-0_2.24.25-3+deb8u2_amd64.deb ...
Unpacking libgtk2.0-0:amd64 (2.24.25-3+deb8u2) over (2.24.25-3+deb8u1) ...
Preparing to unpack .../libonig2_5.9.5-3.2+deb8u1_amd64.deb ...
Unpacking libonig2:amd64 (5.9.5-3.2+deb8u1) over (5.9.5-3.2) ...
Preparing to unpack .../libtiff5_4.0.3-12.3+deb8u4_amd64.deb ...
Unpacking libtiff5:amd64 (4.0.3-12.3+deb8u4) over (4.0.3-12.3+deb8u3) ...
Preparing to unpack .../php-tcpdf_6.0.093+dfsg-1+deb8u1_all.deb ...
Unpacking php-tcpdf (6.0.093+dfsg-1+deb8u1) over (6.0.093+dfsg-1) ...
Preparing to unpack .../xserver-common_2%3a1.16.4-1+deb8u1_all.deb ...
Unpacking xserver-common (2:1.16.4-1+deb8u1) over (2:1.16.4-1) ...
Preparing to unpack .../xvfb_2%3a1.16.4-1+deb8u1+b1_amd64.deb ...
Unpacking xvfb (2:1.16.4-1+deb8u1+b1) over (2:1.16.4-1) ...
Processing triggers for systemd (215-17+deb8u7) ...
Setting up perl-modules (5.20.2-3+deb8u8) ...
Setting up perl (5.20.2-3+deb8u8) ...
Setting up debconf-utils (1.5.56+deb8u1) ...
Setting up debconf-i18n (1.5.56+deb8u1) ...
Setting up libgnutls-deb0-28:amd64 (3.3.8-6+deb8u7) ...
Setting up libgnutls-openssl27:amd64 (3.3.8-6+deb8u7) ...
Setting up apache2-bin (2.4.10-10+deb8u10) ...
Setting up apache2-utils (2.4.10-10+deb8u10) ...
Setting up apache2-data (2.4.10-10+deb8u10) ...
Setting up apache2 (2.4.10-10+deb8u10) ...
Setting up libgtk2.0-common (2.24.25-3+deb8u2) ...
Setting up libgtk2.0-0:amd64 (2.24.25-3+deb8u2) ...
Setting up libgtk2.0-bin (2.24.25-3+deb8u2) ...
Setting up libonig2:amd64 (5.9.5-3.2+deb8u1) ...
Setting up libtiff5:amd64 (4.0.3-12.3+deb8u4) ...
Setting up php-tcpdf (6.0.093+dfsg-1+deb8u1) ...
Setting up xserver-common (2:1.16.4-1+deb8u1) ...
Setting up xvfb (2:1.16.4-1+deb8u1+b1) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Installing necessary packages. Please wait...
Packages installed!
TS3 already latest version.
Downloading latest SinusBot.
Extracting SinusBot files.
SinusBot update done.
Starting systemd installation
Installed systemd file to start the SinusBot with "service sinusbot {start|stop|status|restart}"
Cronjob already set for SinusBot updater!
Installing YT-Downloader now!
Cronjob already set for YT-DL updater!
Downloading YT-DL now...
Download successful!
youtube-dl is up-to-date (2017.07.23)
Generated README_installer.txt!
Deleted /tmp/.sinusbot.lock
Please wait... This will take some seconds!
/dev/fd/63: line 1020: /etc/init.d/sinusbot: No such file or directory
SinusBot could not start! Starting it directly. Look for errors!
2017/07/22 19:23:30 X [MAIN] Starting up fake x-server...
___ ___ _  _ _   _ ___ ___  ___ _____  BETA
/ __|_ _| \| | | | / __| _ )/ _ \_   _|
\__ \| || .` | |_| \__ \ _ \ (_) || |
|___/___|_|\_|\___/|___/___/\___/ |_|

Version: 0.9.21-87a90ce
(C) 2013-2017 Michael Friese. All rights reserved.

2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin ZTSupport - SupportChannel With ServerGroup Support.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin advertising.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin aloneMode.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin badchan.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin bookmark.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin covatar.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin dev.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin followme.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin idle.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin metadata.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin norecording.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin rememberChannel.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin showcase.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin sound.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin stickyChannel.js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin tunakills_ranking (1).js
2017/07/22 19:23:30 [GENERAL/SCRIPTS] INFO   Loading ScriptPlugin welcometext.js
a manual update is required
Error on line 1055. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L1055

Wäre sehr dankbar wenn mir der Author oder jemand anderes helfen könnte..desweiteren wieso sagt der bot immer nach jedem neustart a manuel update is required aber der Beta Beitrag bekommt kein Update angezeigt?

Zeit vom Server falsch.

Hi,

Thanks for your reply. I waited around half an hour. But there is no progress.

Then I can't help you.
Let the server work over night or so...

 

[ComeBackGo]

Ubuntu 16.04.2 the last version sinus bot

 

[irgendwr]

This has nothing to do with the sinusbot, it's an issue with the installer developed by a community member.
Report this in the thread of the script which is linked in the error message, otherwise the developer won't see your post.

 

[ComeBackGo]

 

[samip537]

Could there be a version which does not need ROOT PERMS?

 

[PreXooN]

Hi,
I have a problem with scrypt. I install on clear Debian 8.
Username [sinusbot]:
Your sinusbot user is: sinusbot
User "sinusbot" already exists.
Downloading TS3 client files.
Installing the TS3 client.
Read the eula!
Do the following: Press "ENTER" then press "q" after that press "y" and accept it with another "ENTER".
Welcome to the TeamSpeak 3 Client for Linux on amd64 installer

In order to install this software you are required to accept the license
agreement, please press return to view the license.

You can scroll with the arrow keys and quit the viewer by pressing 'q'.
[RETURN]
q
Please type y to accept, n otherwise: y
Creating directory TeamSpeak3-Client-linux_amd64
Verifying archive integrity... All good.
Uncompressing TeamSpeak 3 Client for Linux on amd64 100%
TS3 client install done.
Downloading latest SinusBot.
Error while downloading with cURL (Status = 403). Trying it with wget.
Error on line 768. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L768
root@Sinusbot:/opt/ts3soundboard#

----------------------------
EDIT: https://scr.hu/9yKMRa

 

[Craftii]

Betriebssystem: Debian 8
SinusBot Version: 0.9.x
TS3 Version: 3.x.x


E: Unable to locate package virt-what
Error on line 64. Report this to the author at https://forum.sinusbot.com/threads/sinusbot-installer-script.1200/ only. Not a PN or a bad review, cause this is an error of your system not of the installer script. Or have a look directly to your error: https://github.com/Sinusbot/installer-linux/blob/master/sinusbot_installer.sh#L64
root@vps:~#

 

[Craftii]

View attachment 1262

Das gleich Problem hab ich auch!