Sinusbot blockt Prozesse

MultiworldLP · Mar 27, 2018

Hallo Leute,

ich habe seit gestern ein kleines Problem mit Sinusbot.

Dieses sieht wie folgt aus:

Wenn ich Sinusbot über den Nutzer sinusbot starte, startet wie gewohnt alles. Von meinen
6 Bots startet durch AutoReconnect meistens nur 1-2 Bots. Wartet man ca. 30-60 Sekunden
ist aufeinmal der Teamspeak / MySQL (Einlogen nicht möglich) nicht mehr erreichbar. Scheinbar blockt Sinusbot dort die Dienste?

Kill ich nun den Prozess von Sinusbot, funktioniert direkt wieder alles, als wäre nichts gewesen. Ich kann mir leider
nicht erklären, wo hierbei der Fehler liegt. Hat da jemand Erfahrungen mit und kann mir helfen.

MultiworldLP · Mar 27, 2018

Code:

2018/03/27 14:04:29 867c195a 94f26938 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a 94f26938 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  About to run.
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Prespawn.
2018/03/27 14:04:29 867c195a 89e232ad INFO   Starting instance ts3server://127.0.0.1?port=9987&nickname=Team-Bot&password=&channel=&channelpassword=
2018/03/27 14:04:29 867c195a cb858214 DEBUG  About to run.
2018/03/27 14:04:29 867c195a b8575371 WARN   Could not create Chat-Tabletable Chat already exists
2018/03/27 14:04:29 867c195a b8575371 WARN   Could not create WhisperReceive-Tabletable WhisperReceive already exists
2018/03/27 14:04:29 867c195a b8575371 WARN   Could not create Notifications-Tabletable Notifications already exists
2018/03/27 14:04:29 867c195a 94f26938 INFO   Starting instance ts3server://127.0.0.1?port=9987&nickname=I%20love%20%23Dreist&password=&cid=431&channelpassword=
2018/03/27 14:04:29 867c195a cb858214 WARN   Could not create Chat-Tabletable Chat already exists
2018/03/27 14:04:29 867c195a cb858214 WARN   Could not create WhisperReceive-Tabletable WhisperReceive already exists
2018/03/27 14:04:29 867c195a cb858214 WARN   Could not create Notifications-Tabletable Notifications already exists
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not delete from FileTransferno such table: FileTransfer
2018/03/27 14:04:29 867c195a b8575371 DEBUG  Could not insert into FileTransfer-Tableno such table: FileTransfer
2018/03/27 14:04:29 867c195a cb858214 INFO   Starting instance ts3server://127.0.0.1?port=9987&nickname=MultiBot&password=&cid=356&channelpassword=
2018/03/27 14:04:29 867c195a b8575371 INFO   Starting instance ts3server://127.0.0.1?port=9987&nickname=PommesBot&password=&cid=429&channelpassword=
2018/03/27 14:04:29 867c195a 156c7c35 DEBUG  TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018/03/27 14:04:29 867c195a 156c7c35 DEBUG  TS>QXcbConnection: Could not connect to display unix/:40.0
2018/03/27 14:04:29 867c195a 156c7c35 DEBUG  Closed.
2018/03/27 14:04:29 867c195a 156c7c35 INFO   TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018/03/27 14:04:30 867c195a 89e232ad DEBUG  TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018/03/27 14:04:30 867c195a 89e232ad DEBUG  TS>QXcbConnection: Could not connect to display unix/:40.0
2018/03/27 14:04:30 867c195a 89e232ad DEBUG  Closed.
2018/03/27 14:04:30 867c195a 89e232ad INFO   TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018/03/27 14:04:30 867c195a 94f26938 DEBUG  TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018/03/27 14:04:30 867c195a 94f26938 DEBUG  TS>QXcbConnection: Could not connect to display unix/:40.0
2018/03/27 14:04:30 867c195a 94f26938 DEBUG  Closed.
2018/03/27 14:04:30 867c195a 94f26938 INFO   TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018/03/27 14:04:30 867c195a cb858214 DEBUG  TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018/03/27 14:04:30 867c195a cb858214 DEBUG  TS>QXcbConnection: Could not connect to display unix/:40.0
2018/03/27 14:04:30 867c195a cb858214 DEBUG  Closed.
2018/03/27 14:04:30 867c195a cb858214 INFO   TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018/03/27 14:04:30 867c195a b8575371 DEBUG  TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018/03/27 14:04:30 867c195a b8575371 DEBUG  TS>QXcbConnection: Could not connect to display unix/:40.0
2018/03/27 14:04:30 867c195a b8575371 DEBUG  Closed.
2018/03/27 14:04:30 867c195a b8575371 INFO   TSClient quit. LogLevel has been increased, please try to connect again to see more details.

PaInKiLLeR · Mar 28, 2018

Gib mal Infos zur Ts & Sinusbot Versionen

MultiworldLP · Mar 28, 2018

TS Version: 3.1.1 on Linux
Sinusbot Version: SinusBot 0.13.37-9791176

Alfredo Lima Verde · Mar 28, 2018

chown -R sinusbot:sinusbot /opt/sinusbot

Did you say login problems? try to start the bot with -override-password = YourPassword and then change to a new password and start it by service or screen

MultiworldLP · Mar 28, 2018

The Problem is, that sinusbot crash my teamspeak and database for A while. After i kill sinusbot Process the database and teamspeak Server working.

Alfredo Lima Verde · Mar 28, 2018

chown -R sinusbot:sinusbot /opt/sinusbot
no?

MultiworldLP · Mar 28, 2018

With ls -al All permissions set

Xuxe · Mar 28, 2018

Hi,

i'm sure the sinusbot does not lock up your database or teamspeak.

What kind of Virtualization is it? OpenVZ? Then you maybe run in some trouble with ulimits.
General every hoster (should) implement restrictions, most of them does this. So it's possible that your hoster restricts the number of threads for example; this means post starting the sinusbot you may reach the limit of threads. This may leads to problems with teamspeak, databases or any other network/threaded application which creates threads via fork. MySQL may tries to spawn a new thread and this fails, the result is a crash same for teamspeak.

Please provide outputs from the diag script like described here: https://forum.sinusbot.com/threads/read-me-before-you-post.342/
and the output from dmesg -k command when this happens.

MultiworldLP · Mar 28, 2018

DIAGNOSE TOOL:

Code:

==========================================================
SINUSBOT RELATED
SYSTEM INFORMATION
 - Operating System: Debian GNU/Linux 8.10 (jessie) (OpenVZ)
 - Kernel: Linux 3.16.0-042stab127.2 x86_64
 - Load Average: 0.00 0.01 0.00
 - Uptime: 0 days, 6 hours, 40 minutes, 42 seconds
 - OS x64 check: OK
 - OS Updates: 1 (updates available!)
 - OS Missing Packages: None
 - OS APT Last Update: 27.03.2018 01:01:49 CEST +02:00:00
 - SHELL LOCALE LANG: (not set)
 - Bot Start Script: not found
 - DNS resolution check: www.sinusbot.com resolved to 104.18.41.220 -> OK
 - HTTPS check with IPv4 mode: SUCCESS [Connection was established to www.sinusbot.com, CODE #200]
 - HTTPS check with IPv6 mode: IGNORE
 - CPU:
    (failed retrieving information)
 - RAM:  B/4.00 GB in use (%)
 - SWAP:  B/ B in use (%)
 - DISK: 3.49 GB/90.70 GB in use (3%)
 - Package versions:
   + libglib: 2.42.1-1+b1

BOT INFORMATION
 - Status: not running
 - Webinterface: port locally not reachable (Port: 8087)
 - Binary: /opt/sinusbot/sinusbot
 - Binary Info: MD5 Hash: f42a573b7435a8ff04da446d5ccbe754, Perms: 755, User: sinusbot
 - Version: 0.13.37-9791176
 - TS3 Plugin: installed (md5 hash match)
   - Bot Plugin: 26551adc40e47c6d5d02517b8575d375
   - TS3 Client: 26551adc40e47c6d5d02517b8575d375
 - Config:
   - LogLevel = 3
   - TS3Path = /opt/sinusbot/TeamSpeak3-Client-linux_amd64/ts3client_linux_amd64 (Version 3.1.8)
   - YoutubeDLPath = /usr/local/bin/youtube-dl (does exist, version: 2018.03.14)
 - Installed scripts: Reconnect.js; Volume_Keeper.js; advertising.js; alonemode.js; bookmark.js; followme.js; norecording.js; rememberChannel.js; welcome.js

TIME INFORMATION
 - Time (local): 28.03.2018 21:32:37 CEST +02:00:00
 - Time (remote): 28.03.2018 21:32:37 CEST +02:00:00
 - Time (difference): 0 secs (Time diff less than 2 secs. Good.)
 - Timezone: Europe/Berlin

OTHER INFORMATION
 - TeamSpeak 3 Version: 3.1.8
 - youtube-dl Version: 2018.03.14
 - DiagScript Version: 0.7.0
==========================================================

My hoster said, that he use for virtualisation Virtuozzo . He said he got
restrictions.

MultiworldLP · Mar 31, 2018

@Xuxe any ideas?

Xuxe · Mar 31, 2018

MultiworldLP said:
@Xuxe any ideas?

Xuxe said:
and the output from dmesg -k command when this happens.

Can you provide also kernel logs when this happens, please?

And the output of:

Code:

ulimit -a

MultiworldLP · Mar 31, 2018

"dmesg -k" doing nothing, no output

_____________________________________________________

where can i find the kernel logs? there are right here?

syslog output:

Code:

Mar 31 16:11:01 euve259346 CRON[15986]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
Mar 31 16:16:47 euve259346 freshclam[262]: Received signal: wake up
Mar 31 16:16:47 euve259346 freshclam[262]: ClamAV update process started at Sat Mar 31 16:16:47 2018
Mar 31 16:16:47 euve259346 freshclam[262]: WARNING: Your ClamAV installation is OUTDATED!
Mar 31 16:16:47 euve259346 freshclam[262]: WARNING: Local version: 0.99.2 Recommended version: 0.99.4
Mar 31 16:16:47 euve259346 freshclam[262]: DON'T PANIC! Read http://www.clamav.net/documents/upgrading-clamav
Mar 31 16:16:47 euve259346 freshclam[262]: main.cvd is up to date (version: 58, sigs: 4566249, f-level: 60, builder: sigmgr)
Mar 31 16:16:47 euve259346 freshclam[262]: daily.cld is up to date (version: 24437, sigs: 1893974, f-level: 63, builder: neo)
Mar 31 16:16:47 euve259346 freshclam[262]: bytecode.cvd is up to date (version: 319, sigs: 75, f-level: 63, builder: neo)
Mar 31 16:17:09 euve259346 clamd[278]: SelfCheck: Database status OK.

log dmesg:
empty

_____________________________________________________

ulimit -a

Code:

core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 386206
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65536
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 10240
cpu time               (seconds, -t) unlimited
max user processes              (-u) 386206
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited

MultiworldLP · Mar 31, 2018

@Xuxe sehe grade auch das du Deutsch kannst ^^ Lass lieber dabei bleiben ^^

MultiworldLP · Apr 7, 2018

@Xuxe neues Infos

Sinusbot blockt Prozesse

MultiworldLP

Active Member

MultiworldLP

Active Member

PaInKiLLeR

Helping Hand

MultiworldLP

Active Member

Alfredo Lima Verde

Helping Hand

MultiworldLP

Active Member

Alfredo Lima Verde

Helping Hand

MultiworldLP

Active Member

Xuxe

Containerholic

MultiworldLP

Active Member

MultiworldLP

Active Member

Xuxe

Containerholic

MultiworldLP

Active Member

MultiworldLP

Active Member

MultiworldLP

Active Member